Hello swap! Today I have a Protean and a large Seb 31 on the block today.

Looking to sell today so let’s make a deal! 🤝

Timestamp

Shipping: USPS priority insured

Payment: PayPal friends and family (no notes)

The magic four letter word “YOLO” trumps chat negotiations

Protean $775 OBO

Blade: 20 CV Wharnie, has been sharpened. It's extremely sharp.

Has been carried, and cut with lightly. Has a few snails(see video). Additional pictures can be sent upon request

Sunburst milling pattern

Comes with box, and coa
Action is perfect, if you haven't experienced a protean yet, change that!

Large Sebenza 31 $550 OBO

Blade: Magnacut

Has never been carried, or cut with. Has only been taken out of the box for pictures

Comes with all the goodies, leather sleeve, cloth, tools etc etc

Macassar ebony inlays

Any questions or offers leave a comment first and then send me a message!

https://imgur.com/a/wf7zn02

Ok y’all a couple bangers up for sale I wasn’t intending on moving , but I had a mild heart attack and wrecked my car lol . Good times

🤟🏻SOLD PENDING FUNDS👏🏼Koening Mini Arius , I polished the scales and had Backes EDC put on a nasty nice mirror . Mint condition with box , never cut or carried . Centered , perfect etc etc . Second owner but no use or carry … asking 649.00 shipped Venmo only

https://imgur.com/a/ITZprCr

Null Raiden R2 magnacut blurple hardware . First owner , I installed skiffs . Great condition , scratches on clip from an adventure and a small scratch in the hand rub finish . This thing is BAD to the Bone ! Has box and card , razor edge . Asking 300.00 shipped

Hey guys, got a couple US-made titanium integral bangers for you today. Price is via PayPal F&F only, shipped in the USA.

Timestamp

• Benchmade 781 Anthem - pics & video

This is a nearly brand new Benchmade Anthem, of which I am (I believe) the 2nd owner. It has been fitted with Skiff multirow bearings and the popular MXG Gear deep carry clip. The original bearings, clip, and box are included. It has been carried, but hardly cut with - the edge is factory and still sharp. The only signs of wear I can find on the entire knife are a couple scuffs on the MXG clip, and two tiny contact points where the factory milled clip contacted the scale (see video). It was "disassembled" (it's an integral lol) at some point for the Skiffs to be added. It is well tuned and centered with snappy action. Looking for SV 800 / TV 800.

• MachineWise Sonora #1336 - pics & video

This is an extremely recent MachineWise Sonora, just a couple weeks old, in S90V at 63 HRC that I purchased from its first owner. It has been carried, but not cut with - the edge is factory and pristine. It has no marks or wear anywhere on it that I can see. This is a super recent build, so it has all the improvements and upgrades that the Sonora has received over time, most notably: the snappier detent, the improved flipper geometry, the upgraded plunge grind, and the new Streamline milling pattern. It's very new and still breaking in, so it has a little button stick, which MachineWise states is typical and will wear in. Includes the 3D printed box with bolster coin, COA, lube, and T15 bit. Looking for SV 625 / TV 625.

Trade Interests: I dunno, try me lol. Willing to trade one or both toward something really fancy, too, like a Patrick Martin, Perlow, Morrish, Boros, Jarosz, or Cozart, or something like that. Always interested in French and South African knives. May be willing to consider partial trades with less expensive but high quality stuff, like production SBD or Berg.

Hi, welcome! All SV and TV will be equal as I encourage trading, but standard swap sales practices apply, yolo takes priority. Shipping to US only. Knives will ship USPS priority with tracking provided. PPFF, no notes, thank you! If you have any questions, please let me know. CRK trades encouraged. Thank you all!

Timestamp: https://imgur.com/a/3hPfBDJ

Trade Interests;

CRK Small 21s

CRK Regulars

CRK OPWC

Umfaan

LNIB CRK Small Inkosi DPMC

Ti-Lock

All CRK Considered!

---------------------------------

1 - https://imgur.com/a/7A6aLbq

Chris Reeve Knives Small Sebenza Regular Unique Scenic Graphic "Morning Dawn" with Amethyst

DOB: August 12, 2005

Blade Steel: S30V

Centered: Yes

Disassembled: Possibly, it's old, minty hardware.

Owners: 3+

Carried: Yes, very minor snails on the handle from handling and maybe some carry over the years. Strong anodization and presents minty in most lighting. Minor blemish on lock side chamfer shown near jimping.

Cut: Possibly but absolutely mint blade with no signs of use or blemishes.

Box/Papers: Yes, no original cloth or tubes.

Notes: A beautiful retro scene that emits both dawn and dusk in such a balance that keeps you guessing!

SV/TV - 1100

---------------------------------

2 - https://imgur.com/a/JycxBMN

Chris Reeve Knives Large Sebenza 31 Drop Point Doppler Modified by Valley Bladeworks

DOB: Finished by Valley Bladeworks 8-19-25, Scale codes D-23 Showside, A-24 Lockside

Blade Steel: MagnaCut

Centered: Yes, very slightly lockside.

Disassembled: Yes

Owners: 2

Carried: No

Cut: No

Box/Papers: Yes, no original DOB, outer box sticker, care notes card.

Notes: A beautifully done, precise and deep laser of the doppler pattern that is freshly finished and ready to go!

SV/TV - 450

---------------------------------

3 - https://imgur.com/a/9UYBG8S

Chris Reeve Knives Large Sebenza 21 Drop Point Double Lug Bog Oak Inlay

DOB: D-18 Scale Codes

Blade Steel: S35VN

Centered: Yes

Disassembled: Yes

Owners: 3+

Carried: Yes, a few snails throughout the handle, clean inlay and fresh blade.

Cut: Yes, factory edge has seen cutting.

Box/Papers: Blank CRK box, cloth, paperwork without DOB card.

Notes: Handle presents very nicely, action is really good, blade is clean and fresh and rather new to the knife.

SV/TV - 475

---------------------------------

Thank you!

Hi Everyone,

I'll probably head to bed in an hour, but if I miss you I'll respond back early in the morning. After several thousand knife transactions my PayPal was permanently restricted for selling knives. I can accept venmo, cash app, Apple Pay, Zelle, Wise. Buyer covers fees if using venmo G&S. Anything purchased will get tracking tonight and be in the mail on the way to you tomorrow.

Spider-man G10 Bugout (All NEW Parts, modified by me)

Red flytanium crossfade handles. Satin blade. Blue thumbstuds and standoff. The knife was disassembled to individual pieces, cleaned, polished, and reassembled with care. Pivot was blue loctite'd and the knife tuned for drop shutty action. All parts came from a brand new, sealed, first owner knife. The blade is perfectly centered when closed, and drops shut when you pull the axis lock back. Zero blade play when opened. Packaging included. Check out the video of the drop-shutty action!

Photos: https://imgur.com/a/red-g10-full-size-bugout-modified-build-all-new-parts-tL40ei7

SV: $145 (Ships tomorrow! No trades, please.)

Protech Malibu OPERATOR (A+, BNIB)

Brand new in box. First owner. Only removed from packaging for photos. Perfectly centered. 20CV blade. Drop shut action. The "operator" model means it has no markings on the blade and has a tritium insert on the button. Tritium is a (non-harmful, but don't swallow) radioactive isotope with a 13 year half life. That means 13 years from today it will be half as bright. It requires no charging, it will always be illuminated. There is some factory oil on the handle and blade that you may notice, but it's mint condition.

Photos: https://imgur.com/a/QBIBbGx

SV: $245 (Ships tomorrow! No trades, please.)

CRJB Feldspar (BNIB)

D2 blade steel. Jade G10 handle. Hella good ergonomics. Snappy firing action and bearings mean excellent closing action, as well. Dye the handles most any color you want. First owner, brand new in box, mint condition. Only removed for photos.

Photos:  https://imgur.com/a/crjb-feldspar-new-BbmqBjP

SV: $23 (Ships tomorrow! No trades, please.)

Copper Mini Bugout DLC (All NEW Parts, modified by me)

SMKW 3D machined copper handles with matching flytanium copper handle. Black DLC blade. Drop shutty action with no blade play (check out the video!). All parts come from a brand new bugout and all aftermarket parts were also new. This is from the remaining parts I have from my bugout modifying days. All packaging is included.

Photos:  https://imgur.com/a/brass-mini-bugout-dlc-modified-build-all-new-parts-mLJo4BL

SV: $155 (Ships tomorrow! No trades, please.)

OD Green Bead Blasted Anodized Aluminum Tactile Turn Bolt-Action Pen (BNIB)

Mint condition, only removed from packaging for the photos shown. Bought this using rewards points I had from a dealer and planned to likely sell it here, for a good price. Flawless condition, great tactile turn lifetime warranty. Tactile turn is typically my EDC pen most days of the year.

Photos:  https://imgur.com/a/tactile-bolt-action-pen-mint-new-VIok3kp

SV: $65 (Ships tomorrow! No trades, please.)

Thanks for looking!!

Alright. As we all know, Reddit in their utter ineptitude best wisdom has shifted entirely from the PM system to the chat system. They ALSO allow chats to be deleted, probably so you can hide your weird shit better. For subs like ours, though, that creates a huge issue as we rely on seeing screenshots of messages when settling disputes and uncovering scammers.

SO. There is a feature that just rolled out called "Persistent Messaging" that prevents deletion, but it must be enabled EVERY SINGLE TIME you chat with a user. It is VERY IMPORTANT THAT YOU DO THIS FOR EVERY SINGLE TRANSACTION. PLEASE. PLEASE DO THIS.

HERE is the guide on how to do this. It is VERY simple. Press the settings icon in the individual chat and turn on persistent messaging. Do this every time. Make this a habit with every chat. Seriously. Please. For fucks sake. Reddit is allegedly looking at making it possible to do this as an account-wide setting, but is dragging their feet on it, so PLEASE pay attention and do this.

THANK YOU FOR YOUR ATTENTION TO THIS MATTER don't get scammed please.

Hugs and kisses,
Merky Merk and the Funky Bunch

This will repeat multiple times a day for the next few months, since this is a terrible change and we need everyone to see it.

Timestamp: https://imgur.com/a/CdMxsop

Benchmade Griptilian 550-1: 20CV blade / G10 scales. Has been carried for about a month and used lightly. Has been disassembled and pivot set with purple loctite. One of the blue backspacers has a scratch on it. Blade is centered and lockup is solid. Never been sharpened. SV110 Pictures: https://imgur.com/a/DRSXRrM Video: https://imgur.com/a/n3ij6LN

American Blade Works Slipjoint: Has been carried for about a month. Blade has 3 tiny marks from bouncing around in my pocket. They can be seen in the video. Edge came kind of wonky from the factory. Never been sharpened. SV150 Pictures: https://imgur.com/a/X5vEaAu Video: https://imgur.com/a/jiRHfAT

Timestamp: https://imgur.com/a/XQGe05x

Did 2 Opinels recently that are now looking for a new home! Both have wire pocket clips for pocket carry! Also, both of these are miraculously centered for once!

The first is a bright red, and inspired by Japanese chef knives. Most of those knives I've seen have a very light hamon, so I acid etched a light faux hamon onto the blade. I also made the handle octagonal, followed by dyeing it red and clearcoating it. Bronzed locking ring and a wire clip for a reasonably deep carry (perhaps 1/4" sticks out of pocket). Blade steel is 12c27 stainless. https://imgur.com/a/bwSUux7 Asking $45.

[SOLD] Next is a very dark blue. Inspired by Dan Simmons' constant use of "lapis lazuli sky" in Hyperion, I misunderstood what color lapis lazuli actually is so went for a very dark blue that's almost black (I looked up the actual color later). It's carbon steel, with a drop point blade, and has been used to cut fruit and meat to get a nice patina. I also used finer sand paper than usual to finish the handle so it's quite smooth. Bronzed locking ring and wire clip as well. https://imgur.com/a/jHjiirP Asking $45.

Don't like these? I take custom orders. Any mods you want (sans aftermarket parts) for $40! Handle dyeing, handle reshaping, blade etching, blade grinding, heat anodizing, pocket clip adding (+$5), and more! Contact me and let's design you an Opinel!

I am the original owner of the Jurassic, Skinny Skinner, Half track, and McNees. I am the second owner of the Eklipse and Microtech Amphibian. Non have been cut or carried. All are LNIB. PayPal FF ONLY Timestamp: https://imgur.com/a/pOlYCao ALLLLLL SOLD! Thanks everyone!

Half Track, Harpoon Spanto, Magnacut - LNIB with USAMADEBLADE’s amazing ammo can green and bronze anodizing! Get this for a steal at $300 https://imgur.com/a/qt4mODT SOLD

Jurassic, slicer, Magnacut - LNIB, wearing ShepardCC green camo fat carbon! This was supposed to be my one and done but here we are. It comes with 4 scales. One marbled CF, OD GREEN G10, BLACK G10, and camo green Micarta. $300 https://imgur.com/a/wFDKGsz SOLD

Eklipse, Tanto, 20CV - LNIB, wearing ShepardCC toxic green fat carbon scales! You don’t see these very often! This was another one and done project. It comes with three extra scales. Textured natural Micarta, OD GREEN G10, and Dark Green G10. $300 https://imgur.com/a/0ayqLkx SOLD

XM-18 3.5”, Skinny Skinner, Magnacut - LNIB, wearing ShepardCC marbled frag scales. I purchased this directly from USAMADEBLADES. These haven’t been produced since PRE COVID, so get this one at a steal! I also have marbled CF scales for this that will be thrown in. LNIB $300 https://imgur.com/a/lRWfQvb SOLD

McNees PM MAC 2 3.5 Frag Green/Bronze Ano- never cut or carried. Looking to get $400 https://imgur.com/a/jDfJAO1 SOLD

Microtech Signature Series Shadow Amphibian with DLC blade and hardware with Fluted CF scales. LNIB $350 https://imgur.com/a/UvjKfDs SOLD

Up for are the following knives listed below. Please feel free to ask questions. Additional photos provided upon request. Thanks for looking. Payment via PayPal F&F

Timestamp.https://imgur.com/a/qLnKBlF

No trades at this time.

**Shipping included** **Will NOT ship International**

Prince Customs Protean Frag $800 https://imgur.com/a/protean-P7OiMF6

- Steel: CPM-20CV with Hole

- Sharpened: No

- Used to cut: No

- Carried: No

- Blade Condition: Factory edge on bearings

- Number of Owners: 1

- Centering: Perfect

- Lockup: Solid

- Visible Issues: None

- Accessories: Original box and COA

Rip Knives Fury Mini Gen 2 $800 https://imgur.com/a/fury-mini-v2-lr3T8TE

- Steel: XHP Hollow Ground on Bearings

- Sharpened: No

- Used to cut: No

- Carried: No

- Blade Condition: Factory edge

- Number of Owners: 3+

- Centering: Perfect

- Lockup: Solid

- Visible Issues: Scratches on blade

- Accessories: Case and COA

TBC Knives Urban Dressed $1100 https://imgur.com/a/tbc-urban-5RyvhbF

- Model Number: Urban Dressed

- Steel: M390 on bearings

- Sharpened: No

- Used to cut: No

- Carried: No

- Blade Condition: Factory edge on bearings

- Number of Owners: 1

- Centering: Perfect

- Lockup: Solid

- Visible Issues: None

- Accessories: Pouch and COA

SDK Claymore $1000 https://imgur.com/a/sdk-claymore-xAbaWo7

- Steel: S45 on bearings

- Sharpened: No

- Used to cut: No

- Carried: No

- Blade Condition: Factory edge

- Number of Owners: 2

- Centering: Perfect

- Lockup: Solid

- Visible Issues: None

- Accessories: Pouch and COA

HMC Transient $900 https://imgur.com/a/transient-2-9-c4mLKJ0

- Model Number: 2.9

- Steel: MagnaCut on bearings

- Sharpened: No

- Used to cut: No

- Carried: No

- Blade Condition: Factory edge

- Number of Owners: 1

- Centering: Perfect

- Lockup: Solid

- Visible Issues: None

- Accessories: Pouch and COA

Gavko Larger Nurse $1150 https://imgur.com/a/gavko-larger-nurse-dauuG9r

- Steel: Nitro-V 3.2" on bearings

- Sharpened: No

- Used to cut: No

- Carried: No

- Blade Condition: Factory edge

- Number of Owners: 1

- Centering: favors clip side

- Lockup: Solid

- Visible Issues: None

- Accessories: Pouch

Made with [KnifeSwap Post Generator](https://knifeswap-post-generator.vercel.app/)

Timestamp | Album
Shiro Video
Hinderer Video

Shirogorov Hati Gen 3. Carried, light usage, resharpened at factory angle and is sticky sharp now. Minimal signs of carry and usage throughout, with a small snail trail on the clip. Blade looks like-new. Hardware is in great condition. Disassembled with Shiro bits for a fresh cleaning and tuning before this listing. No blade play, rock, slip, etc. Nice clean crisp detent with ultra smooth hydraulic closure. Includes full kit from recon1.

Asking $700

Hinderer Eklipse Triway Non-Flipper. Maroon canvas micarta showscale, bronze anodized lockside with anodized hardware and clip. Thumbstud opener with a nice medium detent and very smooth closure. Lockup is good and secure and blade is very nicely centered. 20CV blade. This is a Frankenstein-esque build with parts from various Eklipses. User-grade knife with a sharpened edge that's ready for more usage. Snail trails throughout but blade remains looking very clean. Plenty of life left in this piece. Does not include triway parts or original packaging but will come with a nice pouch.

Asking $325

Timestamp/Pics/Video https://imgur.com/a/OgrV4ic

Hello Again,

More Collection Thinning!!

Paypal FF No Notes USA Shipped USPS Ground Advantage

Please Make Payment within 10 Minutes of me suppling Payment Information!!

No Trades Please!!

YOLO Trumps All But is at My Discretion WHO I Sell To!!!!

I will Only Respond To Chat when "CHAT" is in Comments. Thank You

I feel I must say this!!!! Because I have decent prices I get a lot of comments on my posts and it's not my intention to Ignore anyone, but it gets a little hectic and sometimes the YOLOS are seconds apart. Once I say YOURS I give all my attention to that person and I print up a label and then move to next person. As most of you know that takes time. So I will Apologize in Advance if I don't automatically respond!! Please Give ME Time!! Thank You!!!

SV-$125

Kizer Drop Bear Christmas Edition #1 Friday Club S35VN CF G10 Scales. Original Owner. No Cut or Carry. No Disassembly. No Snails. Blade Centered. Was Lucky enough to get #1 when they Dropped. Comes with Box and Docs.

Hey what's up guys! Looking to trade this bundle of goodies, for specifically a Lamia, Roosevelt XL, strider, Shirogorov or Brown knives Cortex. Go ahead send an American made blade trade, you never know, I might like it! Thanks for looking 🍻🇺🇸👊🏽

• Imperial leathers works ship wreck karambit, bought it and never carried or cut with it. I've kept it in the kydex sheath. TV/220$

• Cruz custom micarta bit driver, thing is a sweet bit driver. One of a kind and the color is unique blueish \ green, used it a few times to take apart some knives. Tv\175$

• Last but not least, 2nd owner of this Jon Graham Razel mid tech, rare bird and pretty unique knife in general, The handle has a stonewashed titanium frame with matching tip up tail clip, satin finished lockbar stabilizer. Rides on bearings, nice detent, lockup and blade seating. TV/550$

https://imgur.com/a/fHj6O2Y

https://imgur.com/a/DGBUYC2#hpCcwXv

https://imgur.com/a/DGBUYC2#BwClFXw

https://imgur.com/a/DGBUYC2#UK8iAGH

https://imgur.com/a/DGBUYC2#LxHGVdO

Timestamp + Pics:( https://imgur.com/a/lsGomVB )

Spyderco Dodo – CPM-4V SOLD SOLD SOLD

Lightly carried a couple of times

Minor wear on pocket clip and a small amount on blade (see pics)

Cut only a few zip ties

I am the second owner

Factory sharp edge, never sharpened

Blade centering is dead-on

Includes original box, docs, sticker, and drawstring bag

Price: $155 OBRO

Big Idea Design Utility Knife – Titanium (Custom Engraved)

Timestamp + Pics:( https://imgur.com/a/HGpf1up )

Built-in bottle opener

Customized with a wood-style laser engraving

Hardware anodized bronze

Has been carried and used to cut

Shows wear on the clip and rub marks toward the top of the blade holder (see pics)

I am the original owner

Does not come with box/docs unless I can find them

Price: $110 OBRO

Payment: PayPal F&F, CashApp, or Venmo Shipping: USPS No trades at this time

Timestamp, Photos and Video

CRK Large Inkosi with Natural Micarta inlays and S45VN Insingo blade. Second owner. Recently spa'd. Has a fresh factory edge, newly blasted handles with no snails or marks. Blade shows signs of use with some slight discoloration as shown in the video. Lockup about 50%, centering is perfect. No original docs on this one. Comes with reissued box and reissued COA.

SV: $375 SOLD

PayPal Friends & Family, no notes. Sorry no trades. Shipping to US only. Yolo takes priority, but I reserve the right to choose who to sell to depending on the situation. If you have any questions, let me know. Thanks

Trying to give this bad boy away now.

Stamp

Fox Yaru - Second owner. Light cut and carry. Needs a nice sharpen. Ti and S90V. Started life as blue ti and was darkwashed by previous owner. Also has flipper delete mod. Kind of a mini Becerro. Great little sturdy knife just not for me. Good centering and lockup. No box on this one. Asking $200 $160 $135

YOLO > Chat. Please just YOLO if you want it. CONUS shipping.

A good afternoon price drop,

Timestamp + pics: https://imgur.com/a/VCA2P7t

For your consideration today, I have a XM-24 in S45VN with spear point blade shape. I am original owner purchased direct from hinderer website. Stonewash blue frame, plain hardware, black G10 scale. Ive carried a few time but never cut or disassembled. Comes with original box, peanuts, coa, and extra washers.

Looking for $450 originally, now $380 USD. Shipping CONUS only. Accept Venmo of PPFF.

Hawk Talon

This is a catch and release for me. Second owner. Never used by either I believe. Action is great and so is centering. Comes with the pouch and goodies.

SV: 950

No Trades please, thanks bf or looking!

### [WTS] MachineWise Sonora

**Timestamp/Images:** https://imgur.com/a/OF16adE

New Time Stamp - https://imgur.com/a/U3vvRWD

---

**MachineWise Sonora :**

- Model Number: 1197

- Steel: CPM S90V

- Sharpened: No

- Used to cut: No

- Carried: Yes

- Blade Condition: Factory edge

- Number of Owners: 2

- Centering: Perfect

- Lockup: Solid

- Visible Issues: None

- Accessories: Original box

**Payment methods accepted:** PayPal Goods & Services

**Shipping included?** Yes

**Reason for sale/trade:** Very cool knife it comes with everything stock lube, card, Ti coin, etc.  Full Raw Ti build. A few days after I purchased this, I was able to get an anodized version, and I don't need both.  I only carried and flipped it the day I got it and knew I wasn't going to keep it in the end because of the above.  I want to mention that compared to the brand new one I got, this felt a little dry on the action and thus has a little side to side play.  This is normal according to Machinewise website because of the balisong bushing pivot they use (see card in timestamp).  The blade is suspended in lube between the washers and when it needs some lube, there will be some play.  Adding the lube that comes with the knife should fix this.  I haven't bothered because I only carried it once and wanted to leave it in the state I received it in.  I want to be fully transparent on this.  Also Machinewise gives full warranty on their knives regardless of how many hands it passes through, this is often a question I have when buying on the secondary, so I want to include that information for any potential buyers. https://www.reddit.com/r/Knife_Swap/comments/1m9x4ln/comment/n604qu1/?context=3  Here is a link to the post from the OG owner u/PhinnSoup and the included photos, etc from them. 

Price SV $625.  New Reduced Price $600. Sold via Yolo

**Will NOT ship to:** International

_I confirm I have read all r/Knife_Swap rules._

Made with [KnifeSwap Post Generator](https://knifeswap-post-generator.vercel.app/)

Have a Les George VECP Button Lock Magnacut for rehoming! Fantastic condition. Rock solid lockup, blade centered, buttery smooth action. Second owner but very little carry and cut. No issues. Comes with Les George pouch.

SV: 4️⃣7️⃣5️⃣ ppff

May be interested in a trade for an Oz Roosevelt with cash added coming your way.

Timestamp and Pics: https://imgur.com/a/eJLXeNL

US shipped

PayPal Friends and Family

Please comment that you are sending me a chat before doing so

Trade interests: Protech Tr3 automatic with a non coated blade and non fish scale handle

TS: https://imgur.com/a/nV6KssD

Rockstead Chi

Pics: https://imgur.com/a/JoqSpKT

Video of mirror finish on blade: https://imgur.com/a/gdqS5Vy

Comes with box and papers

2nd owner

Great action and lockup

Stingray inlay

Aluminum handle, 3ZDP blade

Coating on handle has worn off in some spots. Blade has general wear.

Carried, sharpened, and used by first owner.

SV: 545

SV: 490

SV: 465

SOLD Benchmade 940 Osborne with Flytanium Titanium Scales

Pics: https://imgur.com/a/6R7rN5F

Second owner

No box or papers

S30V blade

Gently used by first owner

Factory edge

SV: 160

SOLD

Benchmade 9400 Auto Osborne

Video of action: https://imgur.com/a/YM7QqVM

Pics: https://imgur.com/a/6R7rN5F

Second owner

No box or bag

S30V blade

No major wear on blade, scales have some wear

Not sharpened, but has been carried

SV: 165

Benchmade CLA 4300bk-02

Video of action: https://imgur.com/a/C8CnVeR

Pics: https://imgur.com/a/6R7rN5F

Comes with box but not the microfiber bag

Possibly used by first owner

No visible wear on scales or blade

Factory edge

Magnacut blade

If I didn’t already have the same configuration I would be keeping this one

SV: 185

SOLD

Hello KS!

Repost! $300 --> $275

Timestamp: https://imgur.com/a/HpWyWBe

Pics: https://imgur.com/a/socom-elite-auto-s-e-pearl-inlay-XHpH8Hr

Up for grabs is a new Socom Elite Auto S/E with custom abelone pearl inlays. I am the second owner of this knife, and it has not been used. It is flawless, and beautiful to look at.

• Centering: Perfect
• Condition: New (Second Owner - bought on KS)
• Two-tone drop point blade.
• Black aluminum handle with pearl inlays.
• M390 Blade S/E

Comes with all original packaging and includes new replacement inlays if you prefer traditional grip.

Cost: $275

Thanks!

https://imgur.com/a/jG4D28C

Ts ^{^}

got some bangers up for sale today. All prices include shipping. Cash offers welcome, No trades atm

With that said. F&f no notes. I tried to include all pertinent details, but please feel free to reach out with any questions!

1.BNIB H&H knife/watch display case & Cordua Pouches bundle. ~~165 $115 ($225+ msrp) Gallery: https://imgur.com/a/TwCiMLy I got the h&h case as a gift. Don’t have a use for it it is sealed and unopened. This is the cherry colord model, with the new latch opening top design. The 2 pouches are very high quality cordura nylon which I got off a seller on Etsy. They will also come with patches as shown. All together this was about $100 Original link for these so you can read more: https://www.etsy.com/listing/498843531/?ref=share_ios_native_control~~

1. Herman Micro Sting Full DLC with a Copper PVD blade. Asking $1250 $879 Gallery & video : https://imgur.com/a/5pjyfTP This is a very rare configurations. It features his old signature logo on the blade which I still hate he switched. It looks even more classy paired with the beautiful copper pvd m398 blade, and the full DLC treatment. Which in itself is a rare pairing. It Mint with no flaws. Has stayed in a climate controlled safe entire life. Only handled with gloves. Original owner. Comes with everything , including a dedicated Herman branded zipper pouch (which now are only available sold separately, and no longer have the beautiful old Herman logo either).

3.Jaco De Kock Kazi Flipper — $785 $695 Gallery & video: https://imgur.com/a/0D63CqH This is a handmade full custom. From one of the best of the best coming out of South Africa. Meticulous attention to detail, fit and finish top notch. This was close to $1k table, only selling due to life events.

Never cut, excellent condition. (Few scuffs on pocket clip. Which is to be expected when everything is mirror polished) Scales: vintage micarta Liners/backspacer/clip polished titanium (liners are jeweled on the interior as well) Pivot collars-copper Hand satin rwl-34 Runs on bearings.

Comes with dedicated pelican hardshell type case with metal coa attached.

Good Afternoon Knife Swap!

Giving the Wick another run this time with some trade interests

Shiro F95 Solar System
Shiro F95T Gen 4 Blue Ano
Shiro Bio Dark
Borka/Marfione SBDP
Borka Stitch
Strider Custom SNG
Rassenti Large Nirvana

Timestamp: https://imgur.com/a/YqWDao4

Please comment on this post before sending a message. YOLO>Chat. CONUS Shipping Only & PayPal F&F Only NO NOTES!

Please be aware of your State & Local knife laws. They are your responsibility, so please don't YOLO if it is illegal for you to possess where you live. I will not ship automatic knives to a state where they are banned.

John Wick 4 Deadlock - SV: 3050

https://imgur.com/a/LnsoDzY

https://imgur.com/XArT0Yi

I am the 2nd owner of this box set. Both myself and the original owner have not cut, carried or disassembled this knife. Crazy sharp factory edge. Magnacut. Number 83 of 500. Full set ships with COA, Continental Coins, Tactical Pencil & Wooden Case.

Thank you for looking & happy hunting!

Timestamp, Photos and Video

Oz Roosevelt XL #0437 with Zig Zag milling, 20CV blade, full dark stonewash finish. Third owner. Factory edge, never sharpened. Has likely seen some light use but blade and handles show no signs of wear. Strong, early lockup, no blade play. Comes with COA and Oz cloth slip.

SV: $950

PayPal Friends & Family, no notes. Sorry no trades. Shipping to US only. Yolo takes priority, but I reserve the right to choose who to sell to depending on the situation. If you have any questions, let me know. Thanks