Looking for suggestions a good pocket holster for a LCP MAX 380 that doesn't print and come out of your pocket when you pull the 380 out.

I got a Security 9 recently, shot a bunch of Blazer practice rounds through it at the range.

What do you suggest I keep as personal defense rounds for this pistol when I’m out in the wild?

Hello everyone from Germany

I own a Savage which I can carry loaded while hunting. It has a trigger quite similar to the ruger Marksman trigger. The Savage one has a safety catch/latch which prevents discharge when the Rifle Drops or knocks against something.

I cant find Pictures or Explosion views of the ruger trigger. Does it have such a latch, too?

The attached Picture Shows the Savage trigger with the red circled latch/catch

Suggested brace for PC Charger?

A brace is considered perfectly legal correct?

The first two photos are from the day I brought it home from the pawn shop after giving them $200. The second two are after a few good cleanings, with range trips in between, and cold blue touch ups.

I’m quite happy with this gun. It’s so smooth and loose, accurate, and hasn’t failed on me once. The P series Rugers are beasts!

The slide plate on my Ruger EC9 is stuck. When I pull down on sleeve there is little to no movement and slide plate will move a little but won’t come out. Anyone have this happen to them?

Opened my brand new Ruger 10/22 action to remove the flag and this part fell out immediately. Any ideas what it is so I can try to replace it? It’s about 1 1/4” long. Thanks

Hi all

I recently picked up a new LCP Max at a LGS, along with an extra pair of Ruger brand 10rd magazines. In my preparation one thing I encountered is that while the mags will hold 10rds, when I insert it into the LCP, I am unable to load a round into the chamber due to binding. If I only load 9 rounds, I can chamber a round easily. This is for all 3 mags, and is independent of the ammo. Ive tried Winchester, Fiocchi, Speer Lawman, and Magtech. So whats going on? This is supposed to be a 10+1 firearm. Am i missing something?

So I recently purchased a Ruger LCP for a pocket pistol. I am fully aware that there are no commercial modifications that can be made to integrated sights. But for anyone who is more of a DIY kind of person, has anyone tried to make the front sight stand out by adding a coloring agent? I have used white out in the picture, but it only stays visibly contrasting for about 2-3 weeks. Any suggestions would be much appreciated 🙏

Hello all,

I live in Canada and I have had nothing but problems locating the gen 1 mini 30 magazines, if they are in stock, their prices can vary from $45 to $65 (plus taxes and shipping).

I've recently discovered there are magwell options out there, some 3d printed and the ruger part you can order.

I am curious if anyone has been successful with 3d printing the AR or AK magwell conversions?

I know someone is selling the AK conversion part up here, but it's $15 CAD but i have not been able to get any correspondence from them so I don't get any good feelings with providing credit card info to a store front like that lol.

The other issue is I have not been able to really find any 3d print files that are accessible to Canadian IP addresses.

The Ruger AR magwell part (with all the disclaimers about magazine compatibility aside) costs $40 plus shipping and taxes.

The AR mags can be a bit harder to find, but AK mags are so plentiful and cheap lol.

I am just hoping to get some more recent information or advice on opinions of which route is the better way to go.

Thanks for any help! Cheers!

recently bought a ruger sr40 used from a pawn shop and i just put about 150 rounds thru it 0 issues and today after i left the range i went to load it with my magazine loaded with my edc ammunition and it would not feed a single round properly but the past 2-3 range visits its shot and fed without issue any ideas? i have never shot it with my edc ammunition only with fmj’s but it has loaded before with my edc ammunition. (pretty new firearm owner)

Much more comfortable to carry but getting used to the red dot and zeroing it to 10 yards - Ruger Max 9 - Osight SE - Blackhawk stache iwb

Mini- 14 300BLK, Samson A-TM folding stock, 30 rd Ruger Factory Magazine.

Still perfecting " rock and lock "

Recently noticed that the bottom of the grip of my Security 9 Compact has a bit of play in it. Is this normal? I don't remember having it before.

P.S. no comments about dropping the slide on an empty chamber please.

Thanks

So I'm looking at picking up another pistol but stuck between a few they are as follows

Sig Sauer P250 in 40 S&W Sig Sauer P250 in 9mm Smith&Wesson model 10 38 special Smith&Wesson M&P9c

Just curious what would y'all choose

I just bought an RXM and I’m absolutely in love with it. I’ve been writing out parts that I want to upgrade to improve function/performance and wanted your guys opinion. Am I missing anything important?

• NDZ Extended Slide Release (https://ndzperformance.com/ghost-glock-gen-1-4-bullet-slide-release-gho-bsr-v/)

• NDZ Extended Slide Lock Lever (https://ndzperformance.com/ndz-glock-gen-1-5-esll-ndz-esll-17-v/)

• NDZ Extractor (https://ndzperformance.com/ndz-glock-gen-1-4-17-extractor-ndz-glk-ext-g3-9mm-v/)

• NDZ Extended Magazine Release (https://ndzperformance.com/ndz-glock-gen-1-3-hybrid-mag-release-gmrh-g3-v/)

Replaced all upper components except barrel with oem Glock parts and was hoping that the oem Glock striker safety would fix this trigger bar movement issue. What would fix this. The trigger bar is contacting the safety but instead of it being firm and going up and over it goes and to the side then it breaks through. You can noticeably feel it doing that pop over feeling in the trigger.

Hi all! Just brought home an SP101DAO, and noticed that this screw channel leading up toward the cylinder release latch looks completely different from pictures of SP101 models on Ruger’s website. Does anyone know if this is normal, or if there has been a design change?

Thanks!

I fit up a set of rosewood 1911 grips on my MK4 today. I couldn't be happier with the look and the feel of the wider grips.

So I have an issue with my Ruger rifle, and I'm pretty sure it caused by the loose gas key on the bcg. I am about to send it in for warranty, but I do have some aftermarket parts on it. Such as a different gas tub, gas block, buffer spring, and buffer weight. I'm pretty sure the problem is the fact that the gas key is loose in the BCG. When I send it in will they still warranty it? And they will send it back with the aftermaket parts I put on it right?