My DIY radar speed camera: Mullet Edition—Business in the front, party in the back.

[u/nutstobutts]

I've found a nice way to hide my radar speed camera on the street so I can start testing it. From the front, it just looks like every other slow down sign. In the back, is where the party is at.

I cut a small hole in the sign for the camera and attached it all (radar, camera, wifi, and solar panel) to the back. Of course the solar panel looks way out of place. Without it no one would ever see the radar unit, so I think I will power it with a long cable instead. Right now I'm using a second sign to hide it from the rear.

Performance wise, it's working far better than I expected. The radar has a range of about 130ft-180ft (about 40-55 meters).

Attached are 2 photos it took automatically. One is of a white SUV driving from left to right which is about 180ft away.

The second is a white sedan driving towards the camera, this car registered 14 MPH when the photo was taken.

I still need to figure out the best speed and timing for the photos to get the car much closer to the camera. A video would be nice but I think images will be easier to manage.

Of course this thing is nowhere near ready and still needs quite a bit more work. I'll open source everything in a few weeks once I fix some glaring problems. I'm also combining all the dev boards into one board, so it'll be about 3 times smaller than what you see in the photos.

[u/SuperS06]

The fact that you included the picture of the car that's moving sideways makes me fear you may have absolutely no idea of what you're doing.

[u/nutstobutts → u/SuperS06]

That was to show the device picked up car movement from 180ft away, which I think is impressive for something that’s only drawing 0.3 watts

[u/SuperS06 → u/nutstobutts]

So you're just saving all motion regardless of speed?

[u/nutstobutts → u/SuperS06]

I’m just testing the device, so yes. Uploading all data helps me find and fix any bugs before I open source it