r/redneckengineering 16h ago

When you want a riding mower but only got $8 and a dream.

Post image
2.4k Upvotes

r/redneckengineering 13h ago

Built myself a folding offroad wheelbarrow – hauls pretty much anything

Thumbnail
gallery
224 Upvotes

Made it from an old dirt bike, a ladder and a crate. Works for camping with kids… and apparently also for hauling fridges people dump in the woods 😅


r/redneckengineering 6h ago

Uh.....D.I.Y computer cooling pad?

Post image
50 Upvotes

Hope this is redneck enough lol
Wanted to play VRChat but my computer overheats easily and since I was worried about pieces melting and I'm still looking at actual cooling pads...I figured this would do well.

It surprisingly did. When I touched the computer when done it was a little hot, but not to the point it'd burn me!


r/redneckengineering 2h ago

Mailbox muffler

Post image
18 Upvotes

r/redneckengineering 15h ago

Lost some weight so my watch strap is loose

Thumbnail
gallery
93 Upvotes

I don’t know what the knot is called but I always make them when I fiddle - finally put it to practical use


r/redneckengineering 12h ago

fried chicken maker

Post image
53 Upvotes

r/redneckengineering 11h ago

DIY Cluster Pendant made out of retractable shop lights

Thumbnail
gallery
29 Upvotes

r/redneckengineering 1d ago

my jerk kid left his half-eaten fruit cup laying around and attracted a bunch of fruit flies. turned it into a trap.

Post image
1.2k Upvotes

r/redneckengineering 15h ago

Intel A380 Redneck edition

Post image
8 Upvotes

The fan on my Intel A380went out, and I needed it immediately. So a 80mm fan of a windows 98 PC was pressed back into service. So far, so good (I pray it keeps going that well) .


r/redneckengineering 2d ago

My dorm bathroom didn’t have a toilet lid, so I made one out of a plastic bag, a couple of boxes, and some good ol’ fashioned packaging tape.

Thumbnail
gallery
868 Upvotes

r/redneckengineering 1d ago

My father's arms were too short. He also tied up some wire onto the trigger so it's head keeps spining. He untied it before I took the picture.

Post image
80 Upvotes

r/redneckengineering 2d ago

Garage Storage

Thumbnail
gallery
297 Upvotes

Not sure if this qualifies. Made shelves for these bins and hated how much space it took up. Tore the shelves apart and made I-Beams to hang the shelves from above the garage door.


r/redneckengineering 2d ago

Urinal at a Hungarian train station

Post image
553 Upvotes

r/redneckengineering 2d ago

Fixed guitare pedal effect.

Thumbnail
gallery
27 Upvotes

The white flat wire was cut inside… have to fix it the redneck way^


r/redneckengineering 2d ago

My homemade jig to Dave cut 4x4s

Post image
59 Upvotes

Our bandsaw doesn’t have enough hp, and I need to get them cut today, so here we are folks


r/redneckengineering 3d ago

Seems perfectly reasonable to me.

Post image
1.6k Upvotes

r/redneckengineering 3d ago

Ladies and Gentlemen: The Lifted Mower

Post image
1.6k Upvotes

r/redneckengineering 3d ago

Gotta give him credit ... Hell of a welder / fabricator !

Post image
424 Upvotes

r/redneckengineering 2d ago

Fixed guitare pedal effect.

Thumbnail
gallery
0 Upvotes

The white flat wire was cut inside… have to fix it the redneck way^


r/redneckengineering 3d ago

Finally fix the door handle

Post image
39 Upvotes

r/redneckengineering 3d ago

Was too lazy for drill and dowels

Post image
33 Upvotes

Empty plug, velcro strap and zip tie did the trick, too. Why bother


r/redneckengineering 2d ago

I'm getting my money's worth

Thumbnail
gallery
0 Upvotes

The holes in the shoes are from rocks


r/redneckengineering 4d ago

Am I using this properly?

Post image
952 Upvotes

r/redneckengineering 4d ago

How’d Buddy do on this deck for a 275 gallon water tank?

Thumbnail gallery
312 Upvotes